Hastelloy C-276 (UNS N10276) is the most widely used 'universal' corrosion resistant alloy in the Ni-Cr-Mo-W family. Its low carbon and silicon design prevents carbide and intermetallic precipitation in the weld heat-affected zone, so it handles mixed oxidising and reducing media, wet chlorine, hypochlorite and many mineral acids.
Shanghai Hangbo Alloy Group Co., Ltd. supplies Hastelloy C-276 Plate & Sheet to ASTM B575 plate — Hot-rolled plate and cold-rolled sheet from 0.5 mm to 100 mm thick, pickled, shot-blasted or polished — for pressure vessels, reactor linings, heat-exchanger tube sheets and fabrication. All material ships with EN 10204 3.1 certified mill test reports.
Sizes & Specifications
| Item | Specification |
|---|---|
| Thickness | 0.5 – 100 mm |
| Width | ≤ 2500 mm |
| Length | ≤ 12 000 mm / Coil |
| Surface finish | No.1 / 2B / Pickled / Polished |
| Common standards | ASTM B443, B575, B168, B265, B127 |
Hastelloy C-276 Chemical Composition (wt%)
| Element | Content (wt%) | Element | Content (wt%) |
|---|---|---|---|
| Ni (镍) | Balance | V (钒) | ≤ 0.35 |
| Mo (钼) | 15.0–17.0 | C (碳) | ≤ 0.01 |
| Cr (铬) | 14.5–16.5 | Si (硅) | ≤ 0.08 |
| Fe (铁) | 4.0–7.0 | Mn (锰) | ≤ 1.00 |
| W (钨) | 3.0–4.5 | P (磷) | ≤ 0.040 |
| Co (钴) | ≤ 2.50 | S (硫) | ≤ 0.030 |
Hastelloy C-276 Mechanical Properties
| Property | Value |
|---|---|
| Tensile strength (Rm) | ≥ 690 MPa |
| Yield strength (Rp0.2) | ≥ 283 MPa |
| Elongation (A) | ≥ 40 % |
| Hardness | ≤ 200 HB |
| Density | 8.89 g/cm³ |
| Melting range | 1325–1370 °C |
| Thermal conductivity | 9.8 W/m·K |
| Young's modulus | 205 GPa |
| Max service temperature | 1040 °C |
Typical Applications
- FGD absorbers and stack liners
- Chemical reactors, heat exchangers and distillation columns
- Pulp bleaching and chlorine dioxide generation
- Sour (H₂S/CO₂) oil and gas production
- Pharmaceutical and agrochemical synthesis plant
- Waste incineration and effluent treatment
Why Buy from Hangbo Alloy?
- Factory-direct manufacturer — founded 2012, headquartered in Shanghai Songjiang
- Cut-to-size service — bars cut to length, plates flame/plasma/laser-cut, tubes cut and bevelled to drawing
- Certified quality — ISO 9001:2015, GB/T 19001-2016, GJB 9001C-2017, EN 10204 3.1 certificates
- Complete mill documentation — chemical analysis, mechanical test, UT, hardness and grain-size reports with every shipment
Contact Us — Shanghai Hangbo Alloy Group Co., Ltd.
Shanghai Hangbo Alloy Group Co., Ltd.
📍 4F, Building 22, No. 85 Mingnan Road, Songjiang District, Shanghai 201613, China
📞 Tel / WhatsApp: +86 15618279078
✉️ Email: demi@nickel-alloy.com
🕒 Available 24 hours a day, 7 days a week — enquiries answered around the clock.
Send your drawing or enquiry (grade, form, size, quantity, standard) for a same-day quotation.
Continue reading
- 316L Stainless Steel Sheet & Plate: Composition, Mechanical Properties & SupplierStainless Steel 316L plate (S31603) supplier: composition, aged properties, sizes and tolerances. Factory pric
- Monel 400 Seamless Tube & Pipe: Composition, Mechanical Properties & SupplierMonel 400 tube (N04400) supplier: composition, aged properties, sizes and tolerances. Factory price from Hangb
- Incoloy 825 Seamless Tube & Pipe: Composition, Mechanical Properties & SupplierIncoloy 825 tube (N08825) supplier: composition, aged properties, sizes and tolerances. Factory price from Han
- Titanium Grade 5 (Ti-6Al-4V) Round Bar: Composition, Mechanical Properties & SupplierTitanium Grade 5 (Ti-6Al-4V) round bar (R56400) supplier: composition, aged properties, sizes and tolerances.
- 316L Seamless Pipe: Standards, Sizes and Limits316L seamless pipe (UNS S31603): ASTM A312/A269/A270 coverage, common sizes, tolerances and the corrosion limi
- All 17 Product Forms & Specifications guides
Frequently asked questions
What is the MOQ and lead time?
MOQ is flexible — trial orders from a single piece or single plate are welcome. Stock sizes ship in 3–7 days; custom-cut, forged or machined items typically 15–35 days.
Can you provide third-party inspection and shipping to my port?
Yes. SGS / BV / TUV or your nominated inspector can witness all tests before shipment. Full export documentation, sea or air freight on FOB, CIF or DDP terms.
Do you supply machining to drawing?
Yes — CNC turning, milling, drilling, grinding and wire-cut from raw material to finished part in one factory, fewer hand-offs and less material waste.