Titanium Grade 5 (Ti-6Al-4V, UNS R56400, equivalent to Chinese TC4) is the most widely used α+β titanium alloy, accounting for over half of global titanium consumption. It pairs high strength, low density and good corrosion resistance, and is the workhorse for aerospace structures and medical devices.
Shanghai Hangbo Alloy Group Co., Ltd. supplies Titanium Grade 5 (Ti-6Al-4V) Round Bar to ASTM B348 Gr5 bar — We supply nickel, high-temperature, titanium and stainless bars from 2 mm to 600 mm diameter — hot rolled, forged, peeled, ground or turned — to ASTM / AMS / GB with EN 10204 3.1 certification. All material ships with EN 10204 3.1 certified mill test reports.
Sizes & Specifications
| Item | Specification |
|---|---|
| Diameter range | φ2 – 600 mm |
| Length | 1 – 12 m, cut-to-length |
| Delivery condition | Hot rolled / Forged / Peeled / Ground / Turned |
| Tolerance | h9 – h11 (negotiable) |
| Common standards | ASTM B446, B166, B637, B348, AMS 5662 |
Titanium Grade 5 (Ti-6Al-4V) Chemical Composition (wt%)
| Element | Content (wt%) | Element | Content (wt%) |
|---|---|---|---|
| Ti (钛) | Balance | O (氧) | ≤ 0.20 |
| Al (铝) | 5.50–6.75 | C (碳) | ≤ 0.08 |
| V (钒) | 3.50–4.50 | N (氮) | ≤ 0.05 |
| Fe (铁) | ≤ 0.40 | H (氢) | ≤ 0.015 |
Titanium Grade 5 (Ti-6Al-4V) Mechanical Properties
| Property | Value |
|---|---|
| Tensile strength (Rm) | ≥ 895 MPa |
| Yield strength (Rp0.2) | ≥ 828 MPa |
| Elongation (A) | ≥ 10 % |
| Hardness | ≈ 36 HRC |
| Density | 4.43 g/cm³ |
| Melting range | 1604–1660 °C |
| Thermal conductivity | 6.7 W/m·K |
| Young's modulus | 113 GPa |
| Max service temperature | 400 °C |
Typical Applications
- Aircraft structures, landing gear and engine parts
- Orthopaedic and dental implants
- Motorsport and premium bicycle components
- High-pressure corrosion resistant chemical plant
- Marine propellers and offshore parts
- Sports equipment and eyewear frames
Why Buy from Hangbo Alloy?
- Factory-direct manufacturer — founded 2012, headquartered in Shanghai Songjiang
- Cut-to-size service — bars cut to length, plates flame/plasma/laser-cut, tubes cut and bevelled to drawing
- Certified quality — ISO 9001:2015, GB/T 19001-2016, GJB 9001C-2017, EN 10204 3.1 certificates
- Complete mill documentation — chemical analysis, mechanical test, UT, hardness and grain-size reports with every shipment
Contact Us — Shanghai Hangbo Alloy Group Co., Ltd.
Shanghai Hangbo Alloy Group Co., Ltd.
📍 4F, Building 22, No. 85 Mingnan Road, Songjiang District, Shanghai 201613, China
📞 Tel / WhatsApp: +86 15618279078
✉️ Email: demi@nickel-alloy.com
🕒 Available 24 hours a day, 7 days a week — enquiries answered around the clock.
Send your drawing or enquiry (grade, form, size, quantity, standard) for a same-day quotation.
Continue reading
- 316L Seamless Pipe: Standards, Sizes and Limits316L seamless pipe (UNS S31603): ASTM A312/A269/A270 coverage, common sizes, tolerances and the corrosion limi
- A286 Round Bar: UNS S66286 Properties and LimitsA286 (UNS S66286) round bar to AMS 5731 and AMS 5737: chemistry, aged strength and where the iron-base superal
- ASTM B366 Nickel Alloy Pipe Fittings Grade GuideASTM B366 nickel alloy fittings: WP grade table, WP-S and WP-W classes, wall thickness, PMI and how they diffe
- Alloys for Bellows and Expansion JointsBellows alloy selection for expansion joints: how to choose 625, C-276, 800 or 316L strip for fatigue life, co
- Which Alloy for Heat Exchanger Tubes?Heat exchanger tube alloy selection: which stainless, nickel or titanium tube suits the cooling medium, temper
- All 17 Product Forms & Specifications guides
Frequently asked questions
What is the MOQ and lead time?
MOQ is flexible — trial orders from a single piece or single plate are welcome. Stock sizes ship in 3–7 days; custom-cut, forged or machined items typically 15–35 days.
Can you provide third-party inspection and shipping to my port?
Yes. SGS / BV / TUV or your nominated inspector can witness all tests before shipment. Full export documentation, sea or air freight on FOB, CIF or DDP terms.
Do you supply machining to drawing?
Yes — CNC turning, milling, drilling, grinding and wire-cut from raw material to finished part in one factory, fewer hand-offs and less material waste.