Knowledge base
Nickel Alloy & Stainless Steel Knowledge Base
113 engineering grade and product datasheets plus alloy-vs-alloy comparison guides on nickel alloys, superalloys and stainless steels — composition, mechanical properties, standards and applications — written by Hangbo's materials engineering team.
All knowledge posts
Nickel Alloy Pipe and Tube: Seamless vs WeldedSeamless or welded nickel alloy pipe? Compare the ASTM standards behind each route, plus cost, size range, pressure rating and corrosion performance.Published 2026-09-20
How Do You Match Nickel Alloy Pipe, Fittings, Flanges and Filler Metal?Match nickel alloy pipe, fittings, flanges and filler metal by UNS grade: which ASTM standard covers each product form, and where ASME dimensions fit in.Published 2026-09-20
Which Filler Metal Should You Use for Nickel Alloy Welding?Which filler metal for nickel alloy welding? Match ERNiCrMo-3 to 625 and ERNiCrMo-4 to C-276 by AWS A5.14 classification, not by trade name.Published 2026-09-20
How Are Nickel Alloy Flanges Made? Forging, Ring Rolling and StandardsA nickel alloy flange is pinned down by three specifications at once — the alloy, the forging standard such as ASTM B564, and the dimensional standard such as ASME B16.5. This guide covers how a forged and ring rolled flange is made, when a plate-cut flange is acceptable, and what a complete flange purchase order must state.Published 2026-09-18
Forging and Hot Working Temperatures for Nickel AlloysNickel alloys are forged in a narrow window — roughly 120 to 250 C wide — and the correct range is different for every grade. This guide gives typical start and finish forging temperatures for Inconel, Hastelloy, Monel, Incoloy, duplex and titanium, what goes wrong at each end of the window, and how to control heating and heat treatment after forging.Published 2026-09-18
How to Specify Nickel Alloy Plate and Sheet: Standard, Condition and FinishA nickel alloy plate order is not complete until it names the product standard, the rolling condition, the thickness tolerance and the surface finish. This guide maps each alloy to its ASTM standard and gives the tolerance and finish tables you need to write a purchase order that comes back with the plate you asked for.Published 2026-09-18
Which Alloy for a High-Temperature Furnace? 600 °C to 1250 °CFurnace alloy selection by service temperature and atmosphere — oxidation, carburisation and sulphidation — with the grades that actually hold up at 600, 800, 1000 and 1200 °C.Published 2026-09-17
Inconel 718 Heat Treatment: How to Reach Maximum StrengthHow to solution treat and age Inconel 718 to AMS 5662 and AMS 5663 — temperatures, soak times, cooling rates, and the strength you actually get at the end.Published 2026-09-17
Which Alloys Comply with NACE MR0175 for Sour Service?NACE MR0175 / ISO 15156 sour service alloy selection — what counts as sour, which nickel alloys are pre-qualified, and the hardness limits that still apply.Published 2026-09-17
How to Machine Inconel and Hastelloy: Speeds, Feeds and ToolingPractical machining data for Inconel 718, 625 and Hastelloy C-276 — cutting speeds, feed rates, tool grades, coolant strategy and the work-hardening trap.Published 2026-09-17
How to Specify Nickel Alloy Round Bars on a Purchase OrderWhat a complete Inconel, Hastelloy or Monel round bar order must state — grade, UNS, product standard, condition, tolerance class, testing and documentation — with the tolerance table you need.Published 2026-09-17
Which Alloy Resists Seawater Best? 316L to TitaniumSeawater corrosion alloy selection ranked by pitting resistance equivalent number and critical pitting temperature — from 316L through duplex, super duplex, 6Mo and titanium.Published 2026-09-17
How to Weld Hastelloy C276 Without Losing Corrosion ResistancePractical welding guidance for Hastelloy C276 — filler metal selection, heat input limits, interpass temperature, shielding gas and the post-weld cleaning steps that keep the alloy's corrosion resistance intact.Published 2026-09-15
Titanium Grade 5 vs Grade 23: Ti-6Al-4V vs ELI for Medical and AerospaceGrade 5 (Ti-6Al-4V) is the workhorse titanium alloy; Grade 23 is its Extra Low Interstitial variant, offering superior fracture toughness and biocompatibility fPublished 2026-09-08
Titanium Grade 5 (Ti-6Al-4V) vs Inconel 718: Lightweight Titanium vs Heat-Resistant SuperalloyTitanium Grade 5 (Ti-6Al-4V) delivers an exceptional strength-to-weight ratio for lightweight structures. Inconel 718 dominates where extreme temperature and coPublished 2026-09-08
Titanium Grade 2 vs Grade 5: Commercially Pure Titanium vs Ti-6Al-4VTitanium Grade 2 (UNS R50400) is commercially pure and corrosion-driven; Grade 5 (Ti-6Al-4V, UNS R56400) is the workhorse alloy when strength governs.Published 2026-09-07
Titanium Grade 2 vs Grade 7: When Palladium Makes the DifferenceTitanium Grade 7 (UNS R52400) is Grade 2 (UNS R50400) with 0.12-0.25% palladium, raising resistance to reducing acids and chloride crevice attack.Published 2026-09-07
Super Duplex 2507 vs Duplex 2205: When Do You Really Need the Upgrade?Super Duplex 2507 (UNS S32750) offers higher strength and pitting resistance than Duplex 2205 (UNS S32205); 2205 costs less and is easier to weld.Published 2026-09-06
Titanium Grade 2 vs Grade 12: Commercially Pure Titanium vs Alloyed Strength UpgradeTitanium Grade 2 is the workhorse commercially pure (CP) titanium, prized for corrosion resistance and ductility. Grade 12 (Ti-0.3Mo-0.8Ni) adds molybdenum andPublished 2026-09-06
Nickel 200 vs Nickel 201: Pure Nickel for Corrosion and High-Temperature ServiceNickel 200 (UNS N02200) is commercial pure nickel; Nickel 201 (UNS N02201) is the low-carbon version that resists graphitization above 315 C.Published 2026-09-05
Nimonic 75 vs Nimonic 80A: Nickel-Chromium Alloys for High-Temperature StrengthNimonic 75 is a solid-solution Ni-Cr alloy for moderate temperatures; Nimonic 80A adds Ti/Al for precipitation hardening, delivering much higher creep strengthPublished 2026-09-05
Monel 400 vs Monel K-500: Copper-Nickel Alloy with Added StrengthMonel 400 is the classic solid-solution nickel-copper alloy, while Monel K-500 adds aluminum and titanium for age-hardening capability. Both resist seawater briPublished 2026-09-04
Nickel 200 vs Monel 400: Pure Nickel vs Nickel-Copper AlloyNickel 200 is >99% pure nickel, offering outstanding caustic and high-temperature performance. Monel 400 is a nickel-copper alloy with superior seawater andPublished 2026-09-04
Kovar (4J29) vs Invar 36: Glass-Sealing Alloy vs Ultra-Low Expansion StandardKovar (4J29) is engineered for one critical purpose — hermetic sealing to hard glass and ceramics. Invar 36 is the general-purpose ultra-low thermal expansion aPublished 2026-09-03
Monel 400 vs Inconel 600: Copper-Nickel vs Nickel-ChromiumMonel 400 (UNS N04400) is a nickel-copper alloy for hydrofluoric acid and seawater; Inconel 600 (UNS N06600) is nickel-chromium for high-temperature oxidation.Published 2026-09-03
Invar 36 vs Kovar (4J29): Controlling Thermal Expansion for Precision ApplicationsInvar 36 (UNS K93600) and Kovar (UNS K94610) are both controlled-expansion Fe-Ni alloys: Invar holds near-zero thermal expansion, Kovar seals to glass and ceramics.Published 2026-09-02
Invar 36 vs Super Invar: Ultra-Low Thermal Expansion Alloys ComparedInvar 36 is the classic iron-nickel alloy with near-zero thermal expansion around room temperature. Super Invar variants push dimensional stability even furtherPublished 2026-09-02
Inconel 625 vs Duplex 2205: Nickel Superalloy or Duplex Stainless?Inconel 625 (UNS N06625) and Duplex 2205 (UNS S32205) both serve chloride and acid duty; 625 tolerates higher temperature, 2205 costs far less.Published 2026-09-01
Inconel 718 vs Inconel 625: The Ultimate Comparison Guide for Engineers and ProcurementInconel 718 (UNS N07718) reaches about 1275 MPa after ageing against 830 MPa for Inconel 625 (UNS N06625), but 625 is the more corrosion-resistant and weldable grade.Published 2026-09-01
Inconel 600 vs 601: High-Temperature Oxidation Resistance ComparedInconel 600 (UNS N06600) and 601 (UNS N06601) are both high-temperature nickel alloys; 601 adds aluminium for a protective oxide scale up to about 1200 C.Published 2026-08-31
Inconel 617 vs Inconel 625: Solid-Solution Superalloys for Extreme HeatInconel 617 (UNS N06617) is a cobalt-bearing solid-solution alloy for service near 1000 C; Inconel 625 (UNS N06625) is the corrosion-resistant alternative.Published 2026-08-31
Inconel 600 vs Stainless Steel 304: When Corrosion Requirements Outgrow StainlessInconel 600 (UNS N06600) holds strength and corrosion resistance above 600 C where 304 (UNS S30400) oxidises and creeps; the trade-off is a large price gap.Published 2026-08-30
Inconel 600 vs 316L: Nickel-Rich Reliability vs Stainless EconomyInconel 600 (UNS N06600) is a nickel-chromium alloy for high temperature and chloride service; 316L (UNS S31603) is the economical austenitic choice below 400 C.Published 2026-08-30
Incoloy 800 vs Incoloy 800HT: High-Temperature Alloy EvolutionIncoloy 800HT is a modified version of 800 with controlled Al+Ti content and higher carbon, optimized for superior creep-rupture strength at elevated temperaturPublished 2026-08-29
Inconel X-750 vs Inconel 718: Precipitation-Hardening Superalloy ShowdownInconel X-750 and Inconel 718 are both precipitation-hardening nickel-chromium superalloys, but they serve different masters. 718 dominates in high-stress jet ePublished 2026-08-29
Incoloy 825 vs Incoloy 925: Acidic Service Workhorse vs Age-Hardenable UpgradeIncoloy 825 (UNS N08825) is the proven alloy for sulphuric acid and sour gas; Incoloy 925 (UNS N09925) adds age hardening when higher strength is required.Published 2026-08-28
Incoloy 800 vs 825: High-Temperature Workhorse vs Corrosion SpecialistIncoloy 800 (UNS N08800) is chosen for high-temperature service; Incoloy 825 (UNS N08825) adds molybdenum and copper for sulphuric acid and sour gas duty.Published 2026-08-28
Hastelloy C-22 vs C-276: Which Corrosion Alloy Wins in Aggressive Media?Hastelloy C-22 (UNS N06022) and C-276 (UNS N10276) are both Ni-Cr-Mo alloys; C-22 handles oxidising media better, C-276 is the more widely stocked standard.Published 2026-08-27
Hastelloy C-276 vs Inconel 625: Which Alloy Survives the Harshest Chemicals?Hastelloy C-276 (UNS N10276) and Inconel 625 (UNS N06625) both resist aggressive acids and chlorides; C-276 wins in reducing media, 625 in strength.Published 2026-08-27
Hastelloy B-2 vs C-276: Pure Hydrochloric Acid Specialist vs Universal Corrosion ChampionHastelloy B-2 is engineered for one job — exceptional resistance to pure hydrochloric acid. Hastelloy C-276 is the all-rounder for mixed and oxidizing/reducingPublished 2026-08-26
Hastelloy C-2000 vs C-276: Next-Generation vs Classic Corrosion AlloyC-2000 is the advanced Ni-Cr-Mo-Cu alloy offering balanced resistance to oxidizing and reducing acids, while C-276 remains the proven workhorse for severe reducPublished 2026-08-26
GH2132 (A-286) vs Inconel 718: Iron-Nickel Superalloy vs Premium Nickel SuperalloyGH2132 (A-286) is the high-strength iron-nickel superalloy of choice for jet engine fasteners, while Inconel 718 is the gold standard for the most demanding, hiPublished 2026-08-25
Hastelloy B-2 vs B-3: Upgrading Hydrochloric Acid ServiceHastelloy B-2 (UNS N10665) and B-3 (UNS N10675) both resist hydrochloric acid; B-3 adds the phase stability B-2 lacks, so welds and formed parts keep their ductility.Published 2026-08-25
Stainless Steel 904L vs 316L: High-Alloy Austenitic for Aggressive Corrosion904L is a high-alloy austenitic stainless steel with added Mo and Cu, delivering far superior resistance to reducing acids compared to 316L. 316L remains the vePublished 2026-08-24
Duplex 2205 vs Stainless Steel 304: Which Corrosion-Resistant Alloy Fits Your Project?Duplex 2205 (UNS S32205) outclasses 304 (UNS S30400) in chloride and pressure service, at roughly twice the yield strength and a higher price per tonne.Published 2026-08-24
316L vs 304 Stainless Steel: Why Molybdenum Makes All the DifferenceThe battle between 304 and 316L is one of the most common stainless steel discussions in engineering. The addition of molybdenum in 316L brings major corrosionPublished 2026-08-23
Stainless Steel 904L vs 254SMO (6Mo): High-Performance Austenitic Showdown904L (UNS N08904) and 254SMO (UNS S31254) are high-alloy austenitic stainless steels; 254SMO adds about 6% molybdenum for a step change in chloride resistance.Published 2026-08-23
Stainless Steel 304 vs 316L: The Austenitic Stainless Showdown304 (UNS S30400) and 316L (UNS S31603) are the two most common austenitic stainless steels; 316L adds 2-3% molybdenum for chloride and acid service.Published 2026-08-22
Stainless Steel 309S vs 310S: High-Temperature Austenitic Showdown309S (UNS S30908) and 310S (UNS S31008) are austenitic stainless steels for high-temperature service; 310S adds Cr and Ni for oxidation resistance to 1150 C.Published 2026-08-22
Duplex 2205 vs 316L: Austenitic Simplicity or Duplex Strength?Duplex 2205 (UNS S32205) is about twice as strong as 316L (UNS S31603) and far more resistant to chloride stress corrosion cracking, at a higher material cost.Published 2026-08-21
Super Duplex 2507 vs 316L: When Stainless Steel Isn't Enough for SeawaterSuper Duplex 2507 (UNS S32750) delivers roughly twice the yield strength of 316L (UNS S31603) plus the chloride resistance seawater and offshore service demand.Published 2026-08-21
17-4PH vs 316L: Precipitation-Hardened Stainless vs Austenitic17-4PH (UNS S17400) is a precipitation-hardening stainless reaching about 1310 MPa; 316L (UNS S31603) is austenitic, chosen for corrosion resistance and weldability.Published 2026-08-20
17-4PH vs Inconel 718: Precipitation-Hardening Stainless vs Premium Nickel Superalloy17-4PH is the high-strength precipitation-hardening stainless steel offering an unbeatable cost-to-strength ratio. Inconel 718 is the nickel superalloy for extrPublished 2026-08-20
Titanium Grade 5 (Ti-6Al-4V) Round Bar: Composition, Mechanical Properties & SupplierTitanium Grade 5 (Ti-6Al-4V) round bar (R56400) supplier: composition, aged properties, sizes and tolerances. Factory price from Hangbo Alloy.Published 2026-08-19
Incoloy 825 Seamless Tube & Pipe: Composition, Mechanical Properties & SupplierIncoloy 825 tube (N08825) supplier: composition, aged properties, sizes and tolerances. Factory price from Hangbo Alloy.Published 2026-08-18
Monel 400 Seamless Tube & Pipe: Composition, Mechanical Properties & SupplierMonel 400 tube (N04400) supplier: composition, aged properties, sizes and tolerances. Factory price from Hangbo Alloy.Published 2026-08-17
316L Stainless Steel Sheet & Plate: Composition, Mechanical Properties & SupplierStainless Steel 316L plate (S31603) supplier: composition, aged properties, sizes and tolerances. Factory price from Hangbo Alloy.Published 2026-08-16
Hastelloy C-276 Plate & Sheet: Composition, Mechanical Properties & SupplierHastelloy C-276 plate (N10276) supplier: composition, aged properties, sizes and tolerances. Factory price from Hangbo Alloy.Published 2026-08-15
Inconel 625 Round Bar (φ2–600 mm): Composition, Mechanical Properties & SupplierInconel 625 round bar (N06625) supplier: composition, aged properties, sizes and tolerances. Factory price from Hangbo Alloy.Published 2026-08-14
Inconel 718 Round Bar (φ2–600 mm): Composition, Mechanical Properties & SupplierInconel 718 round bar (N07718) supplier: composition, aged properties, sizes and tolerances. Factory price from Hangbo Alloy.Published 2026-08-13
GH2132 (A-286) (S66286 / 1.4980 / GH2132): Composition, Mechanical Properties & SupplierGH2132 (A-286) (S66286) datasheet: chemical composition, mechanical properties, standards (GB/T 14992, GB/T 14994). Factory-direct from Hangbo Alloy.Published 2026-08-12
GH3030 (ЭИ435) (— / 2.4951 / GH3030): Composition, Mechanical Properties & SupplierGH3030 (ЭИ435) (—) datasheet: chemical composition, mechanical properties, standards (GB/T 14992, GB/T 14994). Factory-direct from Hangbo Alloy.Published 2026-08-11
Stainless Steel 904L (UNS N08904): Round Bars, Seamless Tubes & Plates — Technical Data SheetStainless Steel 904L (UNS N08904 / W.Nr. 1.4539) is a premier high-alloy austenitic stainless steel formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the solid-solution strengthening from high nickel (23–28%),Published 2026-08-11
Kovar / 4J29 (K94610 / 1.3981 / 4J29): Composition, Mechanical Properties & SupplierKovar / 4J29 (K94610) datasheet: chemical composition, mechanical properties, standards (ASTM F15, GB/T 14985). Factory-direct from Hangbo Alloy.Published 2026-08-10
Invar 36 (Fe-36Ni, UNS K93600): Round Bars, Seamless Tubes & Plates — Technical Data SheetInvar 36 (Fe-36Ni, UNS K93600) (UNS K93600 / W.Nr. 1.3912 / 4J36) is a premier iron-nickel low-expansion alloy formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the a stable austenitic matrix with approximatelPublished 2026-08-10
Invar 36 / 4J36 (K93600 / 1.3912 / 4J36): Composition, Mechanical Properties & SupplierInvar 36 / 4J36 (K93600) datasheet: chemical composition, mechanical properties, standards (ASTM F1684, GB/T 14985). Factory-direct from Hangbo Alloy.Published 2026-08-09
Duplex 2205 (UNS S31803 / S32205): Round Bars, Seamless Tubes & Plates — Technical Data SheetDuplex 2205 (UNS S31803 / S32205) (UNS S31803 / S32205 / W.Nr. 1.4462) is a premier ferritic-austenitic duplex stainless steel formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the a balanced dual-phase microsPublished 2026-08-09
Duplex Stainless Steel 2205 (S32205 / 1.4462 / 022Cr22Ni5Mo3N): Composition, Mechanical Properties & SupplierDuplex Stainless Steel 2205 (S32205) datasheet: chemical composition, mechanical properties, standards (ASTM A276, ASTM A240). Factory-direct from Hangbo Alloy.Published 2026-08-08
Titanium Grade 5 (Ti-6Al-4V, UNS R56400): Round Bars, Seamless Tubes & Plates — Technical Data SheetTitanium Grade 5 (Ti-6Al-4V, UNS R56400) (UNS R56400 / W.Nr. 3.7165) is a premier alpha-beta titanium alloy formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the a combination of alpha-stabilizing aluminum (5.Published 2026-08-08
Stainless Steel 17-4PH (S17400 / 1.4542 / 05Cr17Ni4Cu4Nb): Composition, Mechanical Properties & SupplierStainless Steel 17-4PH (S17400) datasheet: chemical composition, mechanical properties, standards (ASTM A564, ASTM A693). Factory-direct from Hangbo Alloy.Published 2026-08-07
Monel K-500 (UNS N05500): Round Bars, Seamless Tubes & Plates — Technical Data SheetMonel K-500 (UNS N05500 / W.Nr. 2.4375) is a premier age-hardenable nickel-copper alloy formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the age hardening through aluminum (2.30–3.15%) and titanium (0.35–0.85Published 2026-08-07
Stainless Steel 904L (N08904 / 1.4539 / 00Cr20Ni25Mo4.5Cu): Composition, Mechanical Properties & SupplierStainless Steel 904L (N08904) datasheet: chemical composition, mechanical properties, standards (ASTM B649, ASTM B625). Factory-direct from Hangbo Alloy.Published 2026-08-06
Incoloy 800H / HT (UNS N08810 / N08811): Round Bars, Seamless Tubes & Plates — Technical Data SheetIncoloy 800H / HT (UNS N08810 / N08811) (UNS N08810 / N08811 / W.Nr. 1.4958 / 1.4959) is a premier iron-nickel-chromium superalloy formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the solid-solution strengthePublished 2026-08-06
Stainless Steel 316L (S31603 / 1.4404 / 022Cr17Ni12Mo2): Composition, Mechanical Properties & SupplierStainless Steel 316L (S31603) datasheet: chemical composition, mechanical properties, standards (ASTM A276, ASTM A240). Factory-direct from Hangbo Alloy.Published 2026-08-05
Hastelloy C-22 (UNS N06022): Round Bars, Seamless Tubes & Plates — Technical Data SheetHastelloy C-22 (UNS N06022 / W.Nr. 2.4602) is a premier nickel-chromium-molybdenum-tungsten superalloy formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the solid-solution strengthening from chromium (20.0–22.Published 2026-08-05
Stainless Steel 309S (S30908 / 1.4833 / 06Cr23Ni13): Composition, Mechanical Properties & SupplierStainless Steel 309S (S30908) datasheet: chemical composition, mechanical properties, standards (ASTM A276, ASTM A240). Factory-direct from Hangbo Alloy.Published 2026-08-04
Hastelloy C-276 (UNS N10276): Round Bars, Seamless Tubes & Plates — Technical Data SheetHastelloy C-276 (UNS N10276 / W.Nr. 2.4819) is a premier nickel-molybdenum-chromium superalloy formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the solid-solution strengthening from molybdenum (15–17%), chromPublished 2026-08-04
Stainless Steel 310S (S31008 / 1.4845 / 06Cr25Ni20): Composition, Mechanical Properties & SupplierStainless Steel 310S (S31008) datasheet: chemical composition, mechanical properties, standards (ASTM A276, ASTM A240). Factory-direct from Hangbo Alloy.Published 2026-08-03
Inconel 718 (UNS N07718): Round Bars, Seamless Tubes & Plates — Technical Data SheetInconel 718 (UNS N07718 / W.Nr. 2.4668 / GH4169) is a premier precipitation-hardening nickel-iron-chromium superalloy formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the precipitation hardening through gammaPublished 2026-08-03
Stainless Steel 316 (S31600 / 1.4401 / 06Cr17Ni12Mo2): Composition, Mechanical Properties & SupplierStainless Steel 316 (S31600) datasheet: chemical composition, mechanical properties, standards (ASTM A276, ASTM A240). Factory-direct from Hangbo Alloy.Published 2026-08-02
Inconel 625 (UNS N06625): Round Bars, Seamless Tubes & Plates — Technical Data SheetInconel 625 (UNS N06625 / W.Nr. 2.4856 / GH3625) is a premier austenitic nickel-based superalloy formulated for service environments demanding high mechanical strength and exceptional corrosion resistance. Its high performance stems from the solid-solution strengthening effects of molybdenum (8–10%)Published 2026-08-02
Stainless Steel 304 (S30400 / 1.4301 / 06Cr19Ni10): Composition, Mechanical Properties & SupplierStainless Steel 304 (S30400) datasheet: chemical composition, mechanical properties, standards (ASTM A276, ASTM A240). Factory-direct from Hangbo Alloy.Published 2026-08-01
Titanium Grade 23 (Ti-6Al-4V ELI) (R56401 / 3.7165 / TC4 ELI): Composition, Mechanical Properties & SupplierTitanium Grade 23 (Ti-6Al-4V ELI) (R56401) datasheet: chemical composition, mechanical properties, standards (ASTM B348, ASTM B265). Factory-direct from Hangbo AlloyPublished 2026-07-31
Titanium Grade 12 (R53400 / 3.7105 / TA10): Composition, Mechanical Properties & SupplierTitanium Grade 12 (R53400) datasheet: chemical composition, mechanical properties, standards (ASTM B348, ASTM B265). Factory-direct from Hangbo Alloy.Published 2026-07-30
Titanium Grade 7 (R52400 / 3.7235 / TA9): Composition, Mechanical Properties & SupplierTitanium Grade 7 (R52400) datasheet: chemical composition, mechanical properties, standards (ASTM B348, ASTM B265). Factory-direct from Hangbo Alloy.Published 2026-07-29
Titanium Grade 5 (Ti-6Al-4V) (R56400 / 3.7165 / TC4): Composition, Mechanical Properties & SupplierTitanium Grade 5 (Ti-6Al-4V) (R56400) datasheet: chemical composition, mechanical properties, standards (ASTM B348, ASTM B265). Factory-direct from Hangbo Alloy.Published 2026-07-28
Titanium Grade 2 (R50400 / 3.7035 / TA2): Composition, Mechanical Properties & SupplierTitanium Grade 2 (R50400) datasheet: chemical composition, mechanical properties, standards (ASTM B348, ASTM B265). Factory-direct from Hangbo Alloy.Published 2026-07-27
Nimonic 90 (N07090 / 2.4632 / GH4090): Composition, Mechanical Properties & SupplierNimonic 90 (N07090) datasheet: chemical composition, mechanical properties, standards (BS HR 202, AMS 5829). Factory-direct from Hangbo Alloy.Published 2026-07-26
Nimonic 80A (N07080 / 2.4952 / GH4080A): Composition, Mechanical Properties & SupplierNimonic 80A (N07080) datasheet: chemical composition, mechanical properties, standards (ASTM B637, AMS 5766). Factory-direct from Hangbo Alloy.Published 2026-07-25
Nimonic 75 (N06075 / 2.4951 / GH3030): Composition, Mechanical Properties & SupplierNimonic 75 (N06075) datasheet: chemical composition, mechanical properties, standards (Werkstoff 2.4951, DIN 17744). Factory-direct from Hangbo Alloy.Published 2026-07-24
Nickel 201 (N02201 / 2.4068 / N4 / Ni201): Composition, Mechanical Properties & SupplierNickel 201 (N02201) datasheet: chemical composition, mechanical properties, standards (ASTM B160, ASTM B162). Factory-direct from Hangbo Alloy.Published 2026-07-23
Nickel 200 (N02200 / 2.4066 / N6 / Ni200): Composition, Mechanical Properties & SupplierNickel 200 (N02200) datasheet: chemical composition, mechanical properties, standards (ASTM B160, ASTM B162). Factory-direct from Hangbo Alloy.Published 2026-07-22
Incoloy A-286 (S66286 / 1.4980 / GH2132 / GH132): Composition, Mechanical Properties & SupplierIncoloy A-286 (S66286) datasheet: chemical composition, mechanical properties, standards (ASTM B637, AMS 5731). Factory-direct from Hangbo Alloy.Published 2026-07-21
Incoloy 926 (N08926 / 1.4529 / 00Cr20Ni25Mo6CuN): Composition, Mechanical Properties & SupplierIncoloy 926 (N08926) datasheet: chemical composition, mechanical properties, standards (ASTM B649, ASTM B625). Factory-direct from Hangbo Alloy.Published 2026-07-20
Incoloy 825 (N08825 / 2.4858 / NS1402 / 0Cr21Ni42Mo3Cu2Ti): Composition, Mechanical Properties & SupplierIncoloy 825 (N08825) datasheet: chemical composition, mechanical properties, standards (ASTM B425, ASTM B424). Factory-direct from Hangbo Alloy.Published 2026-07-19
Incoloy 800HT (N08811 / 1.4959 / NS1103): Composition, Mechanical Properties & SupplierIncoloy 800HT (N08811) datasheet: chemical composition, mechanical properties, standards (ASTM B408, ASTM B409). Factory-direct from Hangbo Alloy.Published 2026-07-18
Incoloy 800 (N08800 / 1.4876 / NS1101 / 0Cr20Ni32AlTi): Composition, Mechanical Properties & SupplierIncoloy 800 (N08800) datasheet: chemical composition, mechanical properties, standards (ASTM B408, ASTM B409). Factory-direct from Hangbo Alloy.Published 2026-07-17
Monel K-500 (N05500 / 2.4375 / NCu30Al): Composition, Mechanical Properties & SupplierMonel K-500 (N05500) datasheet: chemical composition, mechanical properties, standards (ASTM B865, ASTM B127). Factory-direct from Hangbo Alloy.Published 2026-07-16
Monel 400 (N04400 / 2.4360 / NCu30 / B30): Composition, Mechanical Properties & SupplierMonel 400 (N04400) datasheet: chemical composition, mechanical properties, standards (ASTM B164, ASTM B127). Factory-direct from Hangbo Alloy.Published 2026-07-15
Hastelloy C-2000 (N06200 / 2.4675 / —): Composition, Mechanical Properties & SupplierHastelloy C-2000 (N06200) datasheet: chemical composition, mechanical properties, standards (ASTM B574, ASTM B575). Factory-direct from Hangbo Alloy.Published 2026-07-14
Hastelloy X (N06002 / 2.4665 / GH3536 / GH22): Composition, Mechanical Properties & SupplierHastelloy X (N06002) datasheet: chemical composition, mechanical properties, standards (ASTM B572, ASTM B435). Factory-direct from Hangbo Alloy.Published 2026-07-13
Hastelloy B-3 (N10675 / 2.4600 / NS3203): Composition, Mechanical Properties & SupplierHastelloy B-3 (N10675) datasheet: chemical composition, mechanical properties, standards (ASTM B335, ASTM B333). Factory-direct from Hangbo Alloy.Published 2026-07-12
Hastelloy B-2 (N10665 / 2.4617 / NS3202): Composition, Mechanical Properties & SupplierHastelloy B-2 (N10665) datasheet: chemical composition, mechanical properties, standards (ASTM B335, ASTM B333). Factory-direct from Hangbo Alloy.Published 2026-07-11
Hastelloy C-22 (N06022 / 2.4602 / NS3308): Composition, Mechanical Properties & SupplierHastelloy C-22 (N06022) datasheet: chemical composition, mechanical properties, standards (ASTM B574, ASTM B575). Factory-direct from Hangbo Alloy.Published 2026-07-10
Hastelloy C-276 (N10276 / 2.4819 / NS3304 / 00Cr15Ni60Mo16W4): Composition, Mechanical Properties & SupplierHastelloy C-276 (N10276) datasheet: chemical composition, mechanical properties, standards (ASTM B574, ASTM B575). Factory-direct from Hangbo Alloy.Published 2026-07-09
Inconel 725 (N07725 / — / —): Composition, Mechanical Properties & SupplierInconel 725 (N07725) datasheet: chemical composition, mechanical properties, standards (ASTM B805, NACE MR0175 / ISO 15156). Factory-direct from Hangbo Alloy.Published 2026-07-08
Inconel X-750 (N07750 / 2.4669 / GH4145): Composition, Mechanical Properties & SupplierInconel X-750 (N07750) datasheet: chemical composition, mechanical properties, standards (ASTM B637, AMS 5667). Factory-direct from Hangbo Alloy.Published 2026-07-07
Inconel 718 (N07718 / 2.4668 / GH4169): Composition, Mechanical Properties & SupplierInconel 718 (N07718) datasheet: chemical composition, mechanical properties, standards (ASTM B637, ASTM B670). Factory-direct from Hangbo Alloy.Published 2026-07-06
Inconel 690 (N06690 / 2.4642 / NS3105): Composition, Mechanical Properties & SupplierInconel 690 (N06690) datasheet: chemical composition, mechanical properties, standards (ASTM B166, ASTM B168). Factory-direct from Hangbo Alloy.Published 2026-07-05
Inconel 625 (N06625 / 2.4856 / GH3625 / NS3306): Composition, Mechanical Properties & SupplierInconel 625 (N06625) datasheet: chemical composition, mechanical properties, standards (ASTM B446, ASTM B443). Factory-direct from Hangbo Alloy.Published 2026-07-04
Inconel 617 (N06617 / 2.4663 / GH3617): Composition, Mechanical Properties & SupplierInconel 617 (N06617) datasheet: chemical composition, mechanical properties, standards (ASTM B166, ASTM B168). Factory-direct from Hangbo Alloy.Published 2026-07-03
Inconel 601 (N06601 / 2.4851 / GH3601 / NS3103): Composition, Mechanical Properties & SupplierInconel 601 (N06601) datasheet: chemical composition, mechanical properties, standards (ASTM B166, ASTM B168). Factory-direct from Hangbo Alloy.Published 2026-07-02
Inconel 600 (N06600 / 2.4816 / GH3600 / NS3102): Composition, Mechanical Properties & SupplierInconel 600 (N06600) datasheet: chemical composition, mechanical properties, standards (ASTM B166, ASTM B168). Factory-direct from Hangbo Alloy.Published 2026-07-01
Popular starting points
Inconel 625UNS N06625 · composition, properties, standards
Hastelloy C-276UNS N10276 · composition, properties, standards
Titanium Grade 5 (Ti-6Al-4V)UNS R56400 · composition, properties, standards
Monel 400UNS N04400 · composition, properties, standards
Inconel 718UNS N07718 · composition, properties, standards
Stainless Steel 316LUNS S31603 · composition, properties, standards
Need a quote or technical support?
Send us the grade, dimensions, standard and quantity. We answer within 10 minutes on working days and quote within 24 hours.
Request a Quote Chat on WhatsApp +86-156-1827-9078